• Elastomer body liner is extended deep into the top and bottom of disc shaft passages with integral 'O' rings to ensure no working media contacts the body material thus ensures longer life for body.
• Close tolerance maintained between the liner, disc and stem reduces operation torque and ensures smooth operation.
• Pneumatic and Electrical actuated Valves are available on demand.
• Top platform of the Valve is suitable to mount actuator or manual gearbox.
• Flow Control Lever is provided to facilitate fine control of flow.

1. Elastomer body liner is extended deep into the top and bottom of disc shaft passages with integral 'O' rings to ensure no working media contacts the body material thus ensures longer life for body.
2. Close tolerance maintained between the liner, disc and stem reduces operation torque and ensures smooth operation.
3. Pneumatic and Electrical actuated Valves are available on demand.
4. Top platform of the Valve is suitable to mount actuator or manual gearbox.
5. Flow Control Lever is provided to facilitate fine control of flow.

We offer a precision engineered range of check valves that allow the flow of fluids in one single direction. These are also named as one-way valves and as the valves have two openings, one for the fluid to enter and the other for it to exit; it is termed as two port valves.

We manufacture a wide range of knife-edge gate valves that are available in various material and sizes. The valves are frequently used for applications to handle powder such as coal handling, ash handling, dry and wet powder handling for power houses, pneumatic conveying systems and material handling equipment.

We fabricate a wide range of ball valves which is also known as flow valves. These valves come with quarter-turn and straight through apparatus. Our range has round closure part that consists of a matching pair of rounded seats that is assigned to take place necessary sealing. The entire range of ball valves finds application in oil, chemical, textile, petrochemical and pharmaceutical industries.

The globe valves for thermic fluid are carefully developed by our skilled engineers to provide smooth flow area. The valve seats are also specifically designed to withstand high temperature steam thermic fluid. We offer these valves with satellite trim that is required for high temperature, high pressure and also for abrasive fluid applications.

The butterfly valves we offer can be used for special applications such as isolation, throttling and control. These are appropriate for transferring fluids like air, water, toxic gases, vacuum, acid, chemicals, LPG, slurries & combination of gases and solid. We manufacture soft seated butterfly valves of different material like nitrile / neoprene / viton and PTFE Teflon based on temperature applications.

Wafer type butterfly valve with an integrally bonded elastomer liner. Requiring absolutely no form of maintenance is a perfect "Fit and forget"valve. Available with either a flangeless or lugged body,in a size range of 50-600 mm,a pressure rating of up to PN 16 and offered with latching lever or actuation as well as different combination of disc and seat materials, "UNIMAC" is a truly versatile valve.

We offer a wide range of strainer valve, which are precisely designed to provide satisfaction to our clients. These are manufactured from qualitative range of raw material sourced form trusted vendors and are available in a broad spectrum of sizes and materials at most competitive prices.

Strainers are being used in Airconditioning system, chemical plants, Textile Mills, Oil Refineries, Ventilation system, Thermal power Stations, to filter water, chemicals gases and other liquid. Construction Detail - The Cast Iron pot and Y-type strainers are casted from good quality of cast iron, grade, CI-260 equivalent to BS-1452 standard. The wall thickness of body is so thick to secure high safety to the rated service and additional reinforcement to strain well in piping system . The top lid is openable and fitted with sufficient number of nuts and bolts with manin body. The filter element can be exchanged without disconnecting the main pipe line. A permanent magnet is provided with drain plug to attract the iron and dust particles
from the water/ liquid

• Filter Element - These strainers are provided with perforated sheet of brass/ Stainless steel/ bronze
• Test Pressure - These strainers are available at different pressure between 150 PSI to 30 PSI (10 kgcm2 to 21 kgcm2).
• Sizes Range - The pot strainers are available with flanged ends from 25 mm to 300 mm connections. The Y-type strainers are available in thread ends from 20 mm to 50 mm and above are with flanged ends.

1. Body M. S.
2. Upper Lid
3. Element-Perforated sheet Brass/ Bronze/ Stainless sheet having 3 mm perforation.

We offer a wide range of plug valves that permit the plug to rotate in and out of its position reducing the scrapping or rubbing. It caters to the requirements of varied industries such as food and pharmaceutical, paper, textile, sugar, power, oil and gas. These valves can also be customized according to customer specifications and details.

We are reckoned as one of the leading manufacturers and exporters of precision engineered gate valves. Our gate valves are also known as sluice valves, which open by hoisting a round gate out of the path of fluid. We also have the ability to customize our range as per the detailed description given by the clients.

We manufacture an extensive range of forged steel valves that have gained huge appreciation for their durability and reliable performance. These valves usually work to achieve perfect shutoff even after years of disuse. Fabricated for controlling flow of fluids in different industrial application, these valves find diverse application in chemical, petrochemical, oil & gas, sugar, cement and others.

Please Clik the PDF